STEP BY STEP

STEP BY STEP

Step 1: 

- Insert BJT transistor in protoboard, each pin in a different now.

Step 2: 

- Check with the datasheet which one is E, eat, B, big, C,cooking, E, emisor, B, base, C,   

collector.

Step 3:  

 

 - Connect the ground in the protoboard.

Step 4: 

- The resistor Brown, 1, Black, 0, Yellow, 3, Of look linking the emisor and the base.

Step 5: 

- Insert the LED (Checking, polarity linking the collector).

Step 6:

- The resistor Red, 2, Red, 2, Brown, 0, Insert the resistor of 220 H, betwean the LED and the power in the proto (Vcc).

Step 7:

- The resistor Brown, 1, Black, 0, Red, 00, Insert the resistor 1K, in the protoboard one pin to the Vcc.

Step 8:

- Connect the wire working as probe in the resistor of 1K.

Step 9:

- Connect the battery to Vcc and ground in the protoboard.

MAKE PRESENT: TRANSISTOR: